
Quick Tutorial: Install Trigger Stops on a PS5 Controller in Minutes!
Want to reduce the travel of your L2 and R2 triggers to shoot faster and improve responsiveness ? With Trigger Stops and its mouse clicks , no more long triggers! Install them easily in just a few minutes with this quick tutorial .
If you prefer a video demonstration, watch our tutorial here: INSTALL PS5 CONTROLLER PALETTES FPS + MOUSE CLICKS
For a detailed guide with all the steps explained in depth, check out our full article here : FPS Pallet Installation Guide
Materials needed to install FPS pallets
Before you begin, make sure you have:
✔️ A compatible PS5 controller (BDM-30, BDM-40 or BDM-50)
✔️ The FPS Draw my Pad palette kit
✔️ A suitable screwdriver
✔️ A welder
✔️ A soldering iron
✔️ A plastic tab
✔️ A clean and well-lit workspace
Step 1: Open the PS5 controller
1️⃣ Remove the side handles by gently unclipping them.
2️⃣ Unscrew the 4 main screws under the handles.
3️⃣ Separate the back shell carefully and set it aside.
Step 2: Preparing the L2/R2 triggers
1️⃣ Locate the L2 and R2 triggers on your controller.
2️⃣ Stick the red adhesives on the large L2 and R2 clicks .
3️⃣ Remove the red part and glue them on the white part (which will reduce the travel of the triggers).
4️⃣ Do the same for L1 and R1 following the same technique.
Step 3: Installing Trigger Stops
1️⃣ Position the Trigger Stops part which allows you to activate/deactivate the system.
2️⃣ Fix the Trigger Stops on the rear hull respecting their orientation.
3️⃣ First screw in the 4 central screws with the small screws provided.
4️⃣ Then add the last 2 screws at the ends to stabilize the assembly.
Step 4: Connection and testing
1️⃣ Connect the Trigger Stops to the paddle circuit to ensure proper operation.
2️⃣ Before closing the controller, test the L2/R2 triggers to make sure they react well with the Trigger Stops installed.
3️⃣ If everything works perfectly, close the controller and screw the 4 main screws back in.
💡 Tip: If you want even more responsive shooting , combine Trigger Stops with a PS5 paddle controller for maximum performance!
Installing the FPS palettes
Want to install FPS paddles for more control? Read, How to Install FPS Paddles on a PS5 Controller in 5 Minutes , to learn how to install them :)
Why install Trigger Stops on your PS5 Controller?
With Trigger Stops , your PS5 controller becomes ultra-efficient :
🎯 Reduced reaction time : Instant trigger activation.
Mouse Clicks : Aesthetic and Satisfying
🔥 Competitive advantage in FPS and shooting games : Faster and more accurate shots.
⚡ Advanced Customization : Ability to enable or disable Trigger Stops depending on the game.
🎮 Ideal for games like Call of Duty , Fortnite , Apex Legends , Valorant , etc.
Where to buy your SPF Palettes?
📖 Detailed Guide: How to Install FPS Paddles on a PS5 Controller
🎥 Complete video tutorial: INSTALL PS5 FPS CONTROLLER PALETTES + MOUSE CLICKS
🛒 Want to buy your FPS palette kit? Order here .
📦 Fast delivery and limited stock!
With this quick tutorial , you can install the Trigger Stops on your PS5 controller in just a few minutes and gain speed and precision in-game.
✔️ Easy installation by carefully following the tutorial
✔️ Perfect for FPS, racing games and RPGs
✔️ Advanced customization with key remapping
If you're too scared to take apart your PS5 Dualsense controller but want to maximize your performance, choose your pre-designed FPS controller from our collection ! Already have a PS5 controller? Just add the FPS paddles and transform it!
🔥 So, are you ready to take your game to the next level? Join the community of FPS Controller players and follow us on social media ! And don't forget, get 5% off your first order by subscribing to our newsletter !